Bodycam Cheat System Requirements and the BIOS Settings You Need
Most failed installs are a BIOS setting or a Windows edition, not the cheat itself. Here is the full requirement list and the order to work through it.
Requirements for a Bodycam cheat are not a suggestion list. Every item below is checked by the loader, and a machine that fails one will not run the build no matter how good the GPU is. Most support tickets come from the firmware section.
Operating system
Windows 10 or Windows 11, 64 bit. Both are supported.
For the Cloud DMA layer specifically, a Pro, Enterprise or Education edition is recommended, because the Hyper-V role is not available on Home through the standard interface. Home is not automatically a dead end, but it is the version that generates the most tickets. Follow the installer notes for your edition rather than guessing.
Hardware
Processor: Intel Core i5 or AMD Ryzen 5 or better. Graphics: NVIDIA GTX 1060 or AMD RX 580 or better, dedicated GPU only. Memory: 8 GB minimum, 16 GB recommended. Storage: around 500 MB free. Internet: stable broadband, needed for activation and for the service link.
The 8 GB figure is a floor, not a target. Cloud DMA runs a virtual environment alongside the game, and 16 GB is the number that stops that environment competing with Bodycam for memory.
Firmware and Windows security settings
These four are mandatory:
- HVCI enabled
- Core Isolation enabled
- TPM enabled
- Secure Boot enabled
HVCI and Core Isolation live in Windows under Device Security and Core Isolation, where Memory Integrity is the toggle. TPM and Secure Boot live in BIOS or UEFI.
Work in this order: BIOS first, Windows second, reboot between each step. Setting Memory Integrity before Secure Boot and TPM are on produces an unsupported state that looks like a broken install.
Memory Integrity will also flag old unsigned drivers. If something unrelated on the machine starts complaining after you enable it, that driver is usually the cause.
Virtualisation
Cloud DMA needs CPU virtualisation on: Intel VT-x or AMD-V, depending on platform. It is often disabled by default on prebuilt systems, and it is a separate setting from the security items above.
The Hyper-V role has to be enabled during the guided setup. The installer walks through it. If the role is not available in the list, that is almost always the Windows edition.
Cloud DMA
Required for full functionality on supported builds. It provisions the virtual environment on your own PC and connects to the service. One machine, no second tower, no PCIe card, no USB bridge.
The Cloud DMA documentation also lists GREENWARD, Static Server and AWS as separate required purchases. Static Server and AWS are two different things and both are needed.
What is not required
No second gaming PC. No hardware DMA card. No capture card. No specific motherboard brand.
Checking before you buy
Open a ticket if you are unsure. Support will run through the edition, the virtualisation support and the firmware settings with you before you spend anything. It takes a few minutes and it is far cheaper than buying first and finding out afterwards.
Confirm each item on this list in order, top to bottom, and do not skip the BIOS step because it looks intimidating. Secure Boot and TPM are two menu entries and a save.